Floating Card Levitation

Category: Kids Magic · Difficulty: 2/5

A playing card hovers above your hand and dances in the air, then lands gently back on the deck.

You'll Need This to Perform the Trick

Invisible Thread Loops + Wax (Floating Card Kit) — Pre-cut invisible-thread loops and a tiny stick of magicians' wax — the only props needed for a stunning floating-card or floating-bill routine.

Step-by-Step Performance Guide

1. 1. Show the Card — Have a spectator pick a card and sign the face. Place the card back on the top of the deck — make sure the audience sees this clearly.
2. 2. Set the Levitation — Hold the deck flat on your left palm at waist height. Cup your right hand above the deck like you're holding an invisible energy.
3. 3. Lift the Card — Slowly raise your right hand. The signed card rises off the deck, hovering a few inches in the air, following your hand's motion.
4. 4. Float and Land — Move your right hand in a slow circle. The card orbits gently. Lower your right hand and the card settles softly back on top of the deck.

The Secret Behind the Trick

1. 1. The Invisible Thread — A single strand of invisible elastic thread runs from a tiny dab of magicians' wax on the back of the card, up over the back of your right hand or ear, and is anchored to a button on your shirt.
2. 2. Setup Before You Start — Apply the wax dab to the back of the card *before* the trick begins (or while the spectator is signing — the dab is on the back, they sign the face). Press the loop's free end onto the wax.
3. 3. Lifting Mechanics — When you raise your right hand, the thread pulls the card up. Tiny hand movements translate to dramatic card movement. Keep your motions smooth.
4. 4. The Disposal — When the card lands back, casually break the thread with a quick pinch. The wax stays — virtually invisible. You can hand the card out for inspection seconds later.

Tags: card levitation, floating card, invisible thread